Mit-ivy industria metalak Latex akriliko aurreratua zigilatzeko indar bikaina, sarkorra
Aplikazio
Itsasgarritasun bikaina du altzairuzko substratuekin eta antzeko uretan oinarritutako primerekin, eta propietate fisiko eta mekaniko bikainak pintura olatua lehortu ondoren.
5. Pintura filmak argi kontserbazio eta kolore kontserbazio bikaina du lehortu ondoren.
Gomendatutako aplikazioa egokia da babes handia behar duten kamioiak, makineriaren piezak, industria ekipamendu arina eta abar drainatzeko.
Datu teknikoak Kolorea askotarikoa
Azal lehorra (% 50eko nahaskortasuna) 15 ℃ C <1h ； 25'C <0.5h
Lehor solidoa (% 50eko hezetasuna) 15'C <48h; 25 ° C <24h
"Kg.cm" 50 hits
Urak (50 ± 5μm) 72h-ko filmak ez du babak erortzen, ez erortzen laguntzen, ez da herdoiltzen.
0.3 gogortasuna (pendulu bikoitza) propietate mekanikoen saiakuntza filmaren lodiera (23 ± 3jμm)
Atxikimendua (Hegelian) 1. maila
Gainazalen tratamendua Estalitako materialaren gainazalak hezetasunik, oliorik, karbono azidoik eta errautsik gabe egon behar du.
Xehetasunak
Oxido larruazaleko altzairua: granailaketa edo harea lehertzeko metodoak, hala nola Sa2.5 mailara prozesatzeko modukoak, harea leherketak egin ezin direnean, mekanikoki leundu behar dira edo
Kimikoki tratatutako flotatutako sorbalda apur guztiak kentzeko.
Oxido larruazalik gabeko altzairua: harea leundutakoa (granailatua) Sa2,5era edo airez aktibatutako artezketa tresna elektrikoak St3ra arte.
Erre diren arkuen eremuak soldatzea, garra moztea edo su artifizialak zuzentzea: artezketa St3 mailara arte.
Oinarrizko materiala pintura film zaharrekin: kendu pintura partikula solteak eta herdoila, eta lixatu St3 airera edo lixatzeko tresna elektrikoekin.
Pintura-pakete tipikoa H902 uretan oinarritutako primerarekin erabil daiteke, edo apaingarrizko estaldura orokor gisa bakarrik erabil daiteke edo beste produktu mota batzuekin erabil daiteke (egiaztatzeko bat etorri behar da).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
